Hey there! As a supplier of concrete bathtubs, I've seen firsthand how important it is to have a safe and slip - free surface in your bathtub. A non - slip surface not only prevents accidents but also enhances the overall bathing experience. So, let's dive into how you can add a non - slip surface to a concrete bathtub.
Why Add a Non - Slip Surface?
Before we get into the how - to, let's talk about why you'd want to add a non - slip surface in the first place. Concrete bathtubs are great. They're durable, stylish, and can add a touch of luxury to your bathroom. However, when wet, concrete can be extremely slippery. This is a major safety concern, especially for kids, the elderly, or anyone with mobility issues. A non - slip surface can significantly reduce the risk of slips and falls, making your bathtub a much safer place to relax.
Materials You'll Need
To add a non - slip surface to your concrete bathtub, you'll need a few key materials. First off, you'll need a non - slip coating. There are several types available on the market, such as epoxy - based coatings or rubberized paints. Epoxy coatings are known for their durability and strong adhesion, while rubberized paints offer a softer, more textured feel. You'll also need some basic tools like a paintbrush, roller, and sandpaper. Sandpaper is essential for preparing the surface of the bathtub before applying the non - slip coating.
Step 1: Prepare the Bathtub
The first step is to thoroughly clean the bathtub. Use a mild detergent and warm water to remove any dirt, soap scum, or grime. Make sure to rinse it well and dry it completely. Once the bathtub is dry, use sandpaper to rough up the surface. This will help the non - slip coating adhere better. You don't need to sand it too aggressively, just enough to create a slightly rough texture. After sanding, wipe away any dust with a clean, dry cloth.
Step 2: Choose the Right Non - Slip Coating
As I mentioned earlier, there are different types of non - slip coatings available. When choosing a coating, consider factors like durability, ease of application, and the look you want to achieve. Epoxy coatings are a popular choice because they're very tough and can withstand heavy use. They also come in a variety of colors, so you can match them to your bathroom decor. Rubberized paints, on the other hand, are more flexible and can provide a more cushioned feel. They're also easier to apply in some cases.
Step 3: Apply the Non - Slip Coating
Now it's time to apply the non - slip coating. Follow the manufacturer's instructions carefully. In most cases, you'll start by stirring the coating well to ensure an even consistency. Then, using a paintbrush or roller, apply a thin, even layer of the coating to the bathtub. Make sure to cover the entire surface, including the sides and bottom. If you're using a roller, roll it in a consistent direction to avoid streaks.
After the first layer has dried (this usually takes a few hours, depending on the product), apply a second layer. This will help to ensure a more durable and effective non - slip surface. Let the second layer dry completely before using the bathtub.
Step 4: Let It Cure
Once you've applied the non - slip coating, it's important to let it cure properly. Curing times can vary depending on the type of coating you used. In general, it can take anywhere from 24 to 72 hours for the coating to fully cure. During this time, avoid using the bathtub to give the coating enough time to harden and bond to the concrete surface.
Maintenance Tips
To keep your non - slip surface in good condition, it's important to follow some simple maintenance tips. Avoid using abrasive cleaners, as they can damage the non - slip coating. Instead, use a mild, non - abrasive cleaner and a soft cloth to clean the bathtub. Regularly inspect the non - slip surface for any signs of wear or damage. If you notice any areas where the coating is starting to peel or wear off, you may need to reapply the coating.
Our Concrete Bathtub Range
As a concrete bathtub supplier, we offer a wide range of products to suit different needs and styles. If you're looking for a freestanding option, check out our Freestanding Stone Bathtub. It's a beautiful and functional addition to any bathroom. For those who prefer a soaking tub, our Concrete Soaking Tub is a great choice. And if you want a freestanding tub with a modern look, our Concrete Freestanding Tub is sure to impress.


Get in Touch
If you're interested in purchasing a concrete bathtub or have any questions about adding a non - slip surface, don't hesitate to get in touch. We're here to help you make the best choice for your bathroom. Whether you're a homeowner looking to upgrade your bathroom or a contractor working on a project, we can provide you with the information and products you need.
References
- "Bathroom Safety: Preventing Falls in the Tub." American Academy of Orthopaedic Surgeons.
- "Non - Slip Coatings for Bathtubs." Consumer Reports.
- "Concrete Bathtub Maintenance Guide." DIY Home Improvement Magazine.

